Image is not available
Image is not available
Image is not available
Image is not available
Image is not available
Image is not available

Effortless setup and configuration, user-friendly graphical interface, and straightforward programming language enable anyone to easily start up the motion system with TITAN servo motor controllers.

Simple

TITAN Servo Motor Controllers are able to control most of the commonly used motors in the automation industry

Universal

TITAN Servo Motor Controllers come with 2ndSight Edge Intelligence that enables learning, analyzing, and monitoring of the motion system’s state and performance.

Intelligent
TITAN-SVX-WIFI
Universal WiFi Servo Motor Controller
Image is not available
Slider

TITAN-SVX-WIFI

WiFi-enabled Universal Servo Motor Controller with Machine Learning

 
Edge Analytics
in Motion
Edge Analytics
in Motion
Edge Analytics
in Motion
Edge Analytics
in Motion
Edge Analytics
in Motion
previous arrownext arrow
Slider

Features

TITAN WiFi Servo Motor Controller

 

•  Supports most types of servo motors: Stepper, Brushless Servo, Linear, Shaft, DC, and Voice Coil

 

• Supports Ethernet, USB, and RS485 communication as well as user-programmable WiFi control for motion data monitoring and sharing.

 

•  Comes with many advanced motion control features: Auto Parameter Detection, Auto Tuning, Force/Torque control, and Multi-thread Motion Programming

 

•  Uses the intuitive and easy-to-use TITAN Software that enables anyone to startup the servo motion system within minutes

 

•  Meets the new challenges and requirements in the emerging field of Industry 4.0/Industrial IoT with 2ndSight motion edge analytics algorithms and the new Arcus Servo 5.0 standard

Wifi_TITAN-5.0
Etherenet
RS485
USB
WiFi Servo Controller

Motion

  • Configurable as Controller Mode or Pulse Mode
  • Motor Types Supported: 2Ph Stepper, 3Ph BLDC Rotary, 3Ph Linear, Voice Coil
  • Easy to use Auto Motor Parameter Detection Wizard and Auto Mechanical Parameter Detection Tuning Wizard
  • Motor and System Database File System Support
  • Open Loop Hold and Dynamic Gain
  • Advanced Plotting and Probing
  • Simplified Gain Setting
  • Force / Torque Control

Communication

  • WiFi enabled
  • USB 2.0 for Wifi Configuration
  • RS485 with 115K Baud
  • Ethernet 100M
  • Micro SD card
  • Protocols Supported: Arcus ASCII, MODBUS RTU, MODBUS ASCII

IO

  • 8 Opto-isolated Digital Inputs

- Controller Mode – Limit+, Limit-, Home, 5 General Inputs

- Pulse Mode – Pulse, Dir, Enable, Clear, Reset, 3 General Inputs

  • 3 Opto-isolated Digital Outputs

- Controller Mode – 3 General Outputs

- Pulse Mode – In-pos, Alarm, 1 General Output

  • 1 Analog Input 0-5V range

Power/Size

Power

  • Voltage Input Range: 24VDC to 48VDC
  • Motor Peak Current: 8A

Size

  • 134 x 82 x 29 mm
Click here for Dimension & Pin-out

Max Ratings

  • Digital Input Forward Diode Max Current: -25mA
  • Digital Output Collector Max Voltage: +24V
  • Digital Output Sink Max Current: -45mA
  • Operating Temperature: -20 to 80˚C
  • Storage Temperature: -55 to 150˚C

Downloads

Download
TITAN Software Installation.exe 13.2MB exe
PDF Spec Sheet 5.95MB PDF

SPECIFICATIONS

Features

TITAN Servo Controller WIFI is a WiFi enabled Universal Servo Controller for Stepper, Servo, Linear, and Voice Coil Motors.

TITAN Servo Controller WIFI supports Ethernet, USB, and RS485 communication as well as user-programmable WiFi control for motion data monitoring and sharing.

TITAN Servo Controller WIFI has many advanced motion control features such as Auto Parameter Detection, Auto Tuning, Force/Torque control, and Multi-thread Motion Programming.

TITAN Servo Controller WIFI supports the TITAN Software, an intuitive and easy to use program for starting up any servo system within a few minutes.

TITAN Servo Controller WIFI has integrated motion EDGE analytics technology called 2ndSight with built-in user-programmable WiFi control for sharing motion data with micro SD card for EDGE data storage.

TITAN Servo Controller WIFI meets the new Servo 5.0 standard and is ready to meet the new challenges of Industry 4.0/Industrial IoT.

Motion
  • Configurable as Controller Mode or Pulse Mode
  • Motor Types Supported: 2Ph Stepper, 3Ph BLDC Rotary, 3Ph Linear, Voice Coil
  • Easy to use Auto Motor Parameter Detection Wizard and Auto Mechanical Parameter Detection Tuning Wizard
  • Motor and System Database File System Support
  • Open Loop Hold and Dynamic Gain
  • Advanced Plotting and Probing
  • Simplified Gain Setting
  • Force / Torque Control
Com
  • WiFi enabled
  • USB 2.0 for Wifi Configuration
  • RS485 with 115K Baud
  • Ethernet 100M
  • Micro SD card
  • Protocols Supported: Arcus ASCII, MODBUS RTU, MODBUS ASCII
IO

   •   8 Opto-isolated Digital Inputs

     
   - Controller Mode – Limit+, Limit-, Home, 5 General Inputs

     
   - Pulse Mode – Pulse, Dir, Enable, Clear, Reset, 3 General Inputs

   • 
  3 Opto-isolated Digital Outputs

     
   - Controller Mode – 3 General Outputs

     
   - Pulse Mode – In-pos, Alarm, 1 General Output

   • 
  1 Analog Input 0-5V range

Power/Size

Power
•   Voltage Input Range: 24VDC to 48VDC
•   Motor Peak Current: 8A
Size
•   134 x 82 x 29 mm

Downloads

Download
TITAN-SVX Installation 4.07.exe 13.2MB exe
PDF Spec Sheet 5.95MB PDF

Technologies

TITAN

Universal Motion Control

2ndSight

Motion EDGE Analytics

Servo 5.0

New Era in Servo Intelligence

Scroll to Top