USB Micro Servo Motor Pulse Driver
TITAN-NXS-SPX
USB Micro Servo Motor Pulse Driver
Features
The TITAN-NXS-SPX is a Closed Loop Servo Pulse Driver that is able to handle most of the commonly used motors in the industry: Stepper, Brushless Servo, Linear, Shaft, DC and Voice Coil Motors
• Supports USB communication
• Comes with many advanced motion control features: Auto Parameter Detection, Auto Tuning, Force/Torque control, and Multi-thread Motion Programming
• Uses the intuitive and easy-to-use TITAN Software that enables anyone to startup the servo motion system within minutes
Connector
- USB Mini-B connector
- 12 pin Micro Clasp connector for encoder/hall sensor
- 16 pin Micro Clasp connector for motion I/O
- 4 pin Mini-fit Jr for motor
- 2 pin Mini-fit Jr for power
Communication
- USB 2.0 using Virtual COM Port
Digital IO
-
3 Opto-isolated Differential High-speed 5V Compliant Digital Inputs for Pulse, Dir, Enable in Pulse Mode (or for Limits and Home in Controller Mode)
-
2 Opto-isolated Differential Digital Outputs for In-pos, Alarm
- Differential ABZ encoder output
Power
- Voltage Input Range: 24VDC to 48VDC
Size/Dimensions
- 98.5 x 56.4 x 25 mm
2ndSight
- 2ndSight is an innovative, comprehensive approach of applying Multi-dimensional Machine Learning methods, Analytical Physics, Statistics, and Regression techniques in quantifying and determining the overall health state of any motion system.
- 2ndSight is a real-time, data-driven, intelligent algorithm that is run on the Edge for increased efficiency and response. 2ndSight's compact and simplified data can easily be shared across networks and to the cloud, in contrast to burdensome, raw motion data.
Comparison
| Power | Dual Power Input | Single Power Input |
| Communication | USB/RS485 | USB |
| Digital Inputs | 8 NPN 24V Compliant | 3 Differential 5V Compliant |
| Digital Outputs | 3 NPN GND Sinking | 2 Differential 5V Compliant |
| Analog Input | 1 Input 0-5V 12 bit | None |
| Encoder Output | None | Differential ABZ |
| 2ndSight Port | Yes | No |
SPECIFICATIONS
Features
The TITAN-NXS-SPX is a Closed Loop Servo Pulse Controller that is able to handle most of the commonly used motors in the industry: Stepper, Brushless Servo, Linear, Shaft, DC and Voice Coil Motors
• Supports USB communication.
• Comes with many advanced motion control features: Auto Parameter Detection, Auto Tuning, Force/Torque control, and Multi-thread Motion Programming.
• Uses the intuitive and easy-to-use TITAN Software that enables anyone to startup the servo motion system within minutes.
Connector
- USB Mini-B connector
- 12 pin Micro Clasp connector for encoder/ hall sensor
- 16 pin Micro Clasp connector for motion I/O
- 4 pin Mini-fit Jr for motor
- 2 pin Mini-fit Jr for power
Com
- USB 2.0 using Virtual COM Port
- Protocols Supported: TITAN ASCII, TITAN ASCII with CRC, MODBUS ASCII, MODBUS RTU
IO
-
3 Opto-isolated Differential 5V Compliant Digital Inputs for Pulse, Dir, Enable
-
2 Opto-isolated Differential Digital Outputs for In-pos, Alarm
Power
- Voltage Input Range: 24VDC to 48VDC
Size
- 98.5 x 54.4 x 25 mm
2ndSight
- 2ndSight (patent-pending) is an innovative, comprehensive approach of applying Multi-dimensional Machine Learning methods, Analytical Physics, Statistics, and Regression techniques in quantifying and determining the overall health state of any motion system.
- 2ndSight is a real-time, data-driven, intelligent algorithm that is run on the Edge for increased efficiency and response. 2ndSight's compact and simplified data can easily be shared across the networks and to the cloud, in contrast to burdensome, raw motion data.
NEXUS Comparison
Technologies
TITAN
Universal Motion Control
2ndSight
Motion EDGE Analytics
Servo 5.0
New Era in Servo Intelligence